Brookfield CT3 Texture Analyzer - Manual (Page 42)

Brookfield Engineering Labs., Inc. Page 42 Manual No. M08-372-C0113
TA43 * 25.4mm DIAMETER BALL PROBE
Nylon 14g
TA49 25.4mm DIAMETER ROUND END
Clear Acrylic.
TA50
5mm DIAMETER BALL PROBE
Surimi application
MISCELLANEOUS PROBES
* included in TA-P-KIT2
** included in TA-P-KIT3
TA-DGA DUAL GRIP ASSEMBLY
These are multipurpose general grips for tensile type testing. The 25mm wide
grips are fitted with rubber inserts to maximise contact adhesion with sample
and are capable of holding rectangular samples up to 5mm thick. Each grip
clamps from both sides of sample with two opposing thumbscrews for precise
alignment. Includes one pair of T-Bolts for mounting to base. Base table kits are
NOT USED with this fixture.
TA7 * KNIFE EDGE
Clear Acrylic 8g. 60mm Wide.
TA9 * NEEDLE PROBE
Stainless Steel. 1.0mm Diameter. 43mm Long.
10º Maximum Taper.
TA22
18SWG BAR FRAME PROBE
Aluminium Frame. 39mm Wide.1.2mm Dia
TA23
12.7mm DIAMETER ROUND END PROBE
Black Delrin. 35mm Long.
TA46 ** TA CURD PROBE 5mm
Stainless Steel, 5mm dia disc ( 0.2 sq cm )
TA47 ** TA CURD PROBE 8mm
Stainless Steel, 8mm dia disc ( 0.5 sq cm )
TA48 ** TA CURD PROBE 10mm
Stainless Steel, 10mm dia disc ( 0.8 sq cm )
TA37
2.36mm DIAMETER CUTTING WIRE PROBE
Aluminium Frame. 40mm Wide.