Brookfield CT3 Texture Analyzer - Manual (Page 43)

Brookfield Engineering Labs., Inc. Page 43 Manual No. M08-372-C0113
TA52
Small Scale MOHRS Shear Blade
Includes one blade holder and five blades. Blades are 9mm Wide x 35mm
Length x .5mm Thick
TA53 * 33mm D Cutting Wire Probe, 40 mm L, Connects to M6 Female Thread
A-2 Fixtures
ACCESSORIES FOR ROTARY BASE TABLE
TA-RT-KIT ROTARY BASE TABLE
Round base table provides quick and easy height adjustment to accommodate
various samples. Accessories listed below are mounted onto this table to facilitate
special sample holding requirements. Includes pair of T-bolts for securing table.
ALL ACCESSORY FIXTURES BELOW MOUNT ONTO ROTARY BASE TABLE
TA-ATT
ADHESIVE TACK TESTER
This tester is used for measuring stickiness of pressure sensitive adhesive
materials such as tape. Requires Rotary Base Table TA-RT-KIT.
TA-AVJ
ADJUSTABLE VICE JIG
This fixture is used for holding smal samples for a puncture test. Good for
Jelly beans, gum drops, etc. Requires Rotary Base Table TA-RT-KIT.
TA-BEC BACK EXTRUSION CELL
The Back Extrusion Cell is used for measuring the consistency of applesauce,
pudding, yogury and similar products. It consists of 3 containers with internal
dimensions of 38.1mm diameter, 24mm deep; includes one 25.4mm diameter
probe. Requires Rotary Base Table TA-RT-KIT.
TA-JTPB JUNIOR THREE POINT BEND FIXTURE
Small scale three point bend fixture for fracture test of brittle materials. Probe
used with this fixture, TA7 Knife Edge Blade, is included in General Probe
Kit TA-P-KIT2. Otherwise, please order TA7 separately. Requires Rotary Base
Table TA-RT-KIT.
TA-JPA
JUNIOR PUNCH ASSEMBLY
This accessory is used for punching through flat samples. Probe used with this
assemblyy, TA10, is included in General Probe Kit TA-P-KIT2. Otherwise, order
TA10 separately. Requires Rotary Base Table TA-RT-KIT.
TA-TBLT Pair of T-bolts with nuts and washers.