Unity reference blank, Testing volatile samples – Cannon Instrument miniPV-X User Manual

Page 29

Advertising
background image

23

CANNON

®

miniPV-Series Automatic Viscometer with VISCPRO

®

Instruction & Operation Manual

Version 1.a— January, 2011;

CANNON

®

Instrument Company

2139 High Tech Road • State College, PA 16803 • USA

the density of both will not be included in relative viscosity calculations.

Unity Reference blank

A preexistent blank, Unity Reference, is hard-coded in the VISCPRO®

software with a value of “1”. Users selecting this blank when running an
RV

sample are effectively calculating the kinematic viscosity of the solution in
a

manner which permits them to use VISCPRO® polymer report options.

Testing volatile samples

The environment for viscosity measurement using the MiniPV

AIRBATH and compound viscometer is much different than it would be

with a conventional liquid bath and a U-shaped viscometer. Because of

the continuous downward flow of air in the AIRBATH, evaporation of

sample components have the potential to adversely affect the analysis.
This

is because evaporation changes the composition of the sample and may

also affect temperature stability).

If you are testing at higher temperatures and/or with samples containing

components which may evaporate during the analysis, cover the sample

with aluminum foil or other easily penetrable membrane and secure with

the “O” ring and cap supplied for that purpose with the MiniPV. This

will seal the sample until the viscosity measurement is performed. Then
the

viscometer tip penetrates the aluminum foil/membrane and performs the

entire analysis without withdrawing completely from the sample vial.

NOTES

If the aluminum foil has been penetrated and the sample has remained

in the analysis chamber for more than a few minutes, do not attempt to

reuse the sample. A new sample should be prepared.

It is especially important to cover the samples when performing solution

viscosity analysis of polymers. Even a slight change of composition

caused by solvent evaporation may cause significant error.

Even samples that are high in viscosity may still contain volatile compo-
nents;

Advertising