COP-USA CD55NV-HD22 - Manual (Page 4)

- -
IMPORTANT SAFEGUARDS
All the safety and operating instruction should be read before the units is operated.
The power supply for the dome
AC24V/1.7A, Which is displayed on the bottom of
the pedestal or other place of the dome.
Do not attempt to disassemble the camera. In order to prevent electric shock, do not
remove screws or covers. There are no user-serviceable parts inside.
The product should be indoor installed and operated to avoid rain and moisture. Do
not use it in wet places. If outdoor installation is needed, the closed protect cover
should be used and it is absolutely prohibited to use it in open air independently.
Do not operate it in case temperature, humidity and power supply are beyond the
limited stipulations.
Do not let the camera aim at the sun or the object with extreme light whatsoever it is
switched on or not. Do not let the camera aim at or monitor bright and standstill object
for a long time.
Do not use aggressive detergent to clean the main body of the camera. Wipe dirt with
dry cloth. If needed, mild detergent can be used suitably.
Operate the intelligent speed dome camera with great care to avoid shock or vibration.
It operate incorrectly, the Speed Dome could be damaged.
Please install the dome to the suitable place for bearing enough capacity.
If necessary, use a commercial lens cleaning paper to clear the lens windows. Gently
wipe the lens window until clean.
² We offer three-year guarantees on all products,excepting the CCDS for one-year
guarnntee.