COP-USA CD55NV-HD22 - Manual (Page 6)

- -
Steps of Installation
a) Wall Installation
1) Unpacking the carton and carefully take out the dome camera and its attachments.
2) Take out the cover of the wall-installed bracket.
Figure5 .
3) Take out system control wires from the bracket Figure 6 .
4) Fix the bracket on the wall Figure7 .
Figure 5 Figure 6 Figure7
5 Aiming the "MARK" of the bracket to the "MARK“ of the flange, push the dome
upward to the end and rotate it with the direction of the arrow until it is clicked and
tightened.
Figure 8 .
6 It's ok to fix the dome to the bracket with hexagon socket head cap screw Figure 9 .
LOCK
Figure 8 Figure 9
b) Steps of Installation for Indoor Ceiling Style
1) Unpacking the carton and carefully take out the dome camera and its attachments .
2) Take out of the bracket, and fix the bracket on the wall.
Figure10 .
3) Please connect the system control wires, video wires, power wires with the bracket
and go through it. Aiming the "MARK" of the bracket to the "MARK“ of the
flange, push the dome upward to the end and rotate it with the direction of the
arrow until it is clicked and tightened
Figure11 .
4) And then, please fix the dome to the bracket with bolts. Figure12 .
LOCK OPEN
PUSH
MARK