COP-USA CD55NV-HD22 - Manual (Page 7)

- -
Figure10 Figure11 Figure12
c) Steps of Installation for Indoor Ceiling Style.
1) Install the pedestal on the base plate Figure13 .
Q6: M2.5×5 round head
black screw
A
B
D
Figure 13 Figure 14
2) Fix the pedestal assembly on the ceiling (Figure14).
3) Aiming the “MARK” on the dome at the notch on the pedestal, push the dome
upward to the end and rotate clockwise until it is clicked
Figure15 .
4) Put the decoration ring near the ceiling and rotate it clockwise until it is tightened
Figure15 .
5) (Figure 16) shows the system is installed.
6) The names of some parts are as follows:
A):Base Plate B): Pedestal C): Decoration Ring D):Pedestal Assembly