COP-USA CD66MK-HW - Manual (Page 12)

- 9 -
PATROL: enter the submenu of the cruising tracks （PATROL）.
PATROL NO: to select the number of the PATROL.
EDIT PATROL: to edit the patrol, the screen will be display as the following figure:
We can use the joystick or the direction keys to modify the label, turn left/right to move the
cursor, and up/down to change the character, the press “CLOSE” to save and quit the editing
status. The PATROL will follow the number 1~16. We can select the preset number and stay
time for each 1~16 number, and if we blank one number, the patrol will skip that number.
RUN PATROL: to run the PATROL, then press “CLOSE” to quit.
CLEAR PATROL: to clear the PATROL we selected.
RETURN: return to the previous menu.
PATTERNS: enter the submenu of the PATTERNS.
PATTERN NO: to select the number of the PATTERN: 1～3.
RECORD PATTERN: enter this item to start the recording of the
pattern, then use joystick or direction keys to move the camera as the
pattern we want, then press “CLOSE” to quit.
RUN PATTERN: to run the PATTERN, then the controlling of the joystick or direction keys
will stop the PATTERN.
CLEAR PATTERN: to clear the PATTERN we selected.
RETURN: return to the previous menu.
CLEAR: enter the submenu of the CLEAR.
CLEAR ALL PRE LABEL: to clear all the PRESET LABELS.
CLEAR ALL SCAN: to clear all the PRESET LABELS.
CLEAR ALL PATROLS: to clear all the PATROLS.
CLEAR
1. CLEAR ALL PRELABEL
2. CLEAR ALL SCAN
3. CLEAR ALL PATROLS
4. CLEAR ALL PATTERNS
5. RETURN
1.< PRESETS >
2.
＜ ＜ ＜ ＜AUTO SCAN＞ ＞ ＞ ＞
3. ＜ ＜ ＜ ＜PATROLS＞ ＞ ＞ ＞
4. ＜ ＜ ＜ ＜PATTERNS＞ ＞ ＞ ＞
5.
MOTION SETUP
6.
＜ ＜ ＜ ＜CLEAR＞ ＞ ＞ ＞
7.
EDIT DOME LABEL
RETURN
1.PATTERN NO. 001
2.PECORD PATTERN
3. RUN PATTERN
4. CLENR PATTERN
5. RETURN
PATTERNS
1.< PRESETS >
2.
＜ ＜ ＜ ＜AUTO SCAN＞ ＞ ＞ ＞
3. ＜ ＜ ＜ ＜PATROLS＞ ＞ ＞ ＞
4. ＜ ＜ ＜ ＜PATTERNS＞ ＞ ＞ ＞
5. ＜ ＜ ＜ ＜ ＞ ＞ ＞ ＞
MOTION SETUP
6.
CLEAR
7.
EDIT DOME LABEL
RETURN