COP-USA CD66MK-HW - Manual (Page 26)

- 23 -
Figure 19 Figure 20
4.8 The installing ways for the camera
1) The installing way of MINTRON camera module
：
a) Take out MINTRON camera , pass through square shape installment hole C of the camera mounting
panel's camera's for 9 core flat wire, then make it that Camera on hole B alignment camera mounting
panel hole A ,and fix it with M2X3 screw
（As Figure 21 shows）.
Figur 21
b) Take out MINTRON camera’s junction board, insert the camera flat wire to the 9 core camera
plug, then insert the plug to 7 core plugs.
（As Figure 2 shows）.
c)
Finally, please fix the hole of camera Junction panel according to the hole D and hole E
with two pcs M2X5 screws
（As Figure 23 shows）.