COP-USA CD66MK-HW - Manual (Page 29)

- 26 -
4.9 Connect the control cable as Figure 28.
Figure 28
Identifier of the alarm lines as Figure 29:
Figure 29
Notice 1: the signal of the alarm in must be switchable; other signals (such as the voltage
signal) will damage the dome. When the alarm signals come from multi-channel, the dome
will respond them one by one, and the response interval is 2 seconds.
Notice 2: In case there are one or more alarm signals, the dome will never respond the
function: “line scanning”, “tracking” and “self-learning” etc.
Connect the alarm lines as Figure 30.
Figure 30