COP-USA DVR2716XD-L - Manual (Page 118)

8/16-CH DVR Quick Start Guide
13
HTTP port is not 80, add the port number after IP address or domain name.

IE will download ActiveX automatically. Then a window pops up and asks for
user name and password. Input name and password correctly, and enter to
view.
2. Connect the DVR to Internet through PPPoE

Enter into the DVR‟s Main MenuSetupNetwork interface to enable PPPoE
and then input user name and password received from your ISP. Next, click
„Apply‟. The DVR will connect to the server and would give a confirmation
message.

If users want to utilize dynamic domain name, please apply for a domain
name in a DNS server supported by the DVR or router. Then add to the DVR or
router.

When accessing the remote interface of DVR, user can input WAN IP/domain
name to access directly (user can enter into Main
menuInformationNetwork interface to check IP address). The browser will
download Active X control

The following steps are the same as the connection way above.
450041000197 A0