COP-USA DVR2716XD-L - Manual (Page 42)

DVR User Manual
36
Fig 4-35 P.T.Z Configuration-Advanced Fig 4-36 Advanced-Preset
Step 3: In the preset setting tab, while clicking Setting button, a dialog will pop-up as Fig 4-37:

User can control the dome by rotating up, down, left, right and adjust
the rotating speed zoom, focus and iris of the dome;
 Select the serial number of the preset point. Click button to
enable the PTZ wiper and click button to enable the PTZ light.
Fig 4-37 Preset Setting
Note: PTZ must support wiper and light function and these two buttons are
just available when selecting PELCOP or PELCOD.
 Click Save button to save the settings, click icon to hide the tool
bar, right click to view the toolbar again; click icon to exit the current
interface.

In the preset interface, click OK button to save the setting; click Exit
button to exit the current interface.
Step4: In the Advanced tab, while clicking cruise “Setting” button, a dialog
box will pop-up as Fig 4-38:
Fig 4-38 Cruise Setting
 Click Add button to add cruise line in the list box (max 8 cruise line can be added); select a cruise line and click Setup button to see a
dialog box as Fig 4-39: