COP-USA DVR2716XD-L - Manual (Page 37)

DVR User Manual
31
Step 3: Input user name, password and host domain name registered in the DNS website (See
the following example).
Step 4: Click TEST to test the effectiveness of the relevant information.
Step 5: Click “Apply” button to save the settings.
Note: The domain name server that selected by user is a banding domain name of DVR.
User should logon the website which provided by the server supplier to register a user name
and password firstly, and then apply for a domain name on line.
Once applied, user can access the server from the IE client by using that domain name.
Enable UPnP: Select UPnP here and then enable UPnP function in your router. Therefore,
there is no need for you to forward LAN IP address and port in the router in connection of
internet. After that, you can check the WAN IP address in the router. Fig 4-30 Other Settings
 How to apply for a domain name?
Here we take www.dyndns.com for example.
Step 1: Input www.dyndns.com in the IE address bar. Click”Free Trial of DynDNS Pro””Start the trial” to register.
Step 2: Input hostname, select service type and input your IP address. The picture is shown as follows:
Step 3: Click “Add to cart”. Then Dynamic DNS Hosts dialog box will be displayed.
Step 4: Create user account. For example, the username is “bcd”, password is “123456”.