COP-USA DVR2716XD-L - Manual (Page 60)

DVR User Manual
54
Snap pictures
The system will automatically capture pictures and save those pictures in the computer by clicking “Snap” icon,
User should set up the path for that picture in the ConfigurationLocal configuration.
PTZ control
Please connect speed dome to the device via RS485 firstly. Make sure the protocol of the speed dome is supported by the device and is
configured accordingly in the DVR. User can move the dome up, down, right, left and adjust rotation speed, Iris and zoom, focus and set
the presets, etc.
Buttons definition:
Buttons Description
to rotate the dome upwards. to rotate the dome diagonally up-left. to rotate the dome
diagonally up-right to rotate the dome downwards. to rotate the dome diagonally
down-right to rotate the dome diagonally down-left to rotate the dome towards left.
to rotate the dome towards right to stop rotating the dome.
Drag the scroll bar to adjust rotating speed of the dome.
'Iris' button. Click button near 'Iris' button to increase light of the dome. Click button
near 'Iris' button to decrease light of the dome.
'Zoom' button. Click button near 'Zoom' button to zoom in the locale picture of this
camera. Click button near 'Zoom' button to zoom out the locale picture of this camera.
'Focus' button. Click button near 'Focus' button to have long focus. Click button near
'Focus' button to have short focus.
Go to the Preset
Select and do auto cruise
Track