COP-USA DVRMPEG4-16LAN - Manual (Page 122)

2.9 Option
Press button to setup the “control port”, “stream port”, “initial mode” and “audio connect”.
Control port/stream port: The port must be set as the same with the DVR, and these ports should be
opened.
Initial mode: If the DVR is 4-channel, please choose 4; if the DVR is 9-channel, please choose 9; If the
DVR is 16-channel, please choose 16.
Audio connect: Only this option is chosen, there is audio output in the Net Client.
2.10 Disconnect and exit
When the connection to DVR has been built up, the button is changed to button. If you
want to disconnect the connection, press this button. A dialogue box pops up——“Are you sure?” Press
“Yes” to disconnect, press “No” to return to the previous menu.
Click button to exit this client program. A dialogue box will pop up——“Do you really want to Exit?
30