COP-USA DVRMPEG4-16LAN - Manual (Page 60)

Port 1 is used for logon;
Port 2 is used for controlling the DVR;
Port 3 is used for live surveillance;
Port 4 is used for backup;
Port 5 is used for playing back.
NET CLIENT ID: The default ID is “NetUser”, the user can set other four ID and password for viewing
through network. (Fig3.2.31 Net client ID).The login-ID and the password are composed of the letters or
number at random. Only the ID set here or the default ID can be used in the remote viewer. The administrator
can restrict the other users to remote view through internet with this configuration setup.
NET DVR ID: The identification of the DVR. You can edit it at will, it can be composed of number, letter and
sign.
NET CLIENT ADDR (address) (Fig3.2.32 Net client address): Fill those options with the network
information needed. Use the “Up” “Down” “Left” “Right” and enter key to fill the blank. “<000.000.000.000>”
means that any IP address can access the DVR through network. The user can set ten IP address to restrict
60