COP-USA DVRMPEG4-16LAN User Manual
Page 62
Advertising
“NC” means normal close. If “NC” is chosen, the DVR will give the alarm if the alarm is at high level.
ALARM MOTION MANAGER
(Fig3.2.35 Alarm motion manager)
“
□
” means unselected, “V” means selected, “Abscissa” means the channel number, “Ordinate” means
annunciator number.
Every channel is able to trigger multiple alarms. For example, if user selects alarm 1, alarm 2 and alarm 3
for channel 1, then once there is motion detected in channel 1, alarm 1, alarm 2, and alarm 3 send alarm
signal in the same time.
Every alarm can work for multiple channels. For example, if user selects channel 1, channel 2 and
62
Advertising
This manual is related to the following products: