COP-USA DVRMPEG4-16LAN - Manual (Page 47)

[SETUP-REC-EVENT(S/D)]
Fig3.2.18 Setup sensor detection
SENSOR DETECTION : Each channel matches a relevant Sensor, for example, Channel 2 is linked to
Sensor 4, if the Sensor 4 gives alarm, the alarm information will be given on the picture by channel 2
(Fig3.2.18 Setup sensor detection), the “□” means that the channel can not be detected, “V” means that the
channel can be.
OPTIONS : (Fig3.2.19 Setup record time)
POST-RECORD TIME : The length of the record time after alarm triggered. You have five options to
choose: 10 seconds, 30 seconds, 1 minute, 5 minutes and 10 minutes.
PRE-RECORD TIME : The length of the record time before alarm triggered. You have five options to
47