COP-USA USBDVR04SP - Manual (Page 101)

MAXDVR & DR Series Cards 101
cover former files until all the partitions’ available storage spaces are less than
100MB.
In case users haven’t enabled recycling record mode and the partitions’
storage spaces are less than 100MB, the alarm will ring and the HDD usage
indicator will turn red.
Tips:
It is recommended that install MAXDVR into the partition installed
with windows system (normally C:), and save record files in HDD
partition D:
Appendix 2.2.4 How to set auto reboot function?
In case Microsoft Windows system continuously runs for a couple of
days, the system may become unstable, therefore it’s suggested to restart the
computer every few of days.
In the basic configuration (refer to Fig4.1), input Windows user name
and password (Note: not MAXDVR user name and password), and select
time interval, then the Windows system will automatically restart according to
the set time.
In case the Windows system closed abnormally, i.e. power supply is cut
off, and when computer reboot next time, MAXDVR system will automatically
restart, and keep the settings as before.
Tips:
Users do not need enable auto reboot function, but it’s suggested
to input the Windows user name and password in the relative area,
therefore when meeting abnormal system exit, users don’t need to input
Windows and MAXDVR user names and passwords.
Appendix 2.2.5 How to quickly use the schedule record
function?
Press ‘Shift’ or ‘Ctrl’ key, and draw the cursor in corresponding areas to