COP-USA USBDVR04SP - Manual (Page 33)

MAXDVR & DR Series Cards 33
(6) Video Loss State
When the indicator light color turns into in row two, it means there
is alarm output.
Manual Record Mode
Manual Record mode is the most commonly used record mode. In case
there is any special event happens, users can select this record mode and
record timely.
Note: You can select high frame rate for short time manual record,
while select low frame rate for long time Schedule Record.
Sensor Alarm Record Mode
Users can use sensors to trigger sensor alarm record for relative
channels. At that time, the record status indicator light will turn red .
Motion Detection Record Mode
It will enable the system to detect image changes and begin to record by
activating motion detection and motion alarm record. For instance, somebody
opens the door, and the system detects image changes and begins to record,
then users can play back the recorded file and find out who opened door.
When there is no movement, the system won’t record and that’s helpful for
saving system resource, and convenient for searching for event record file.
The indicator light color in the record status panel is yellow .
Note: Users may need to setup in three places so as to enable motion
detection record.
(1) Select ‘Motion Detection’ for certain channels in ‘Basic Configuration’
(2) Configure the motion detection areas for certain channels in ‘Motion