COP-USA USBDVR04SP - Manual (Page 50)

MAXDVR & DR Series Cards 50
To test the settings, click ‘Send Mail Test’. If all settings are okay,
message ‘Message Sent Successfully’ will pop up. If some settings are
wrong, there will a pop-up window warning message.
Enable ‘Attachment’, then the present image when an alarm is
triggered will be sent to appointed mailbox.
Fig 4.19 Attachment Setup
Note: for every alarm event, only one picture will be sent.
Users can input a short message about the Auto Mail in advanced,
so the receiver will know what happened.
Channel Name
Image format Resolution
Display Time