COP-USA USBDVR04SP - Manual (Page 42)

MAXDVR & DR Series Cards 42
Set Motion Detection Area
In case users want to customize the detection areas for a certain
channel, first select the camera, then select ‘Clear’ and drag the cursor in the
box on the left side. Now, users can see a green box appears which shows the
motion detection area. Users can select maximum 16 customized areas for
each channel.
By click ‘Clear’, users can clear all the selected areas.
Set Motion Detection Sensitivity
Draw the bar and select a certain value for motion detection sensitivity.
4.4 Schedule configuration
Click and enter Schedule Configuration page as below:
Fig4.8 Schedule Configuration
Our DR series system offers the users with powerful schedule