COP-USA USBDVR04SP - Manual (Page 31)

MAXDVR & DR Series Cards 31
separately and the record file are also saved separately. The parameters, i.e.
camera ID, record date/time and record mode are all saved together with the
record file.
Record Setup
Fig3.5 Record Configuration Panel
In the ‘Record Panel’ of the Basic Configuration page, users can set all
kinds of necessary parameters for recording.
[Time stamp]: By selecting the options, the record date / time message
appears in the record file images.
[Switch]: By selecting the options, users can turn on corresponding
cameras. In case there is no camera for some channel, don’t select the option
so as to save system resource.
[Manual record]: By selecting the options, the relative camera images will
be recorded and saved all the time.
[Manual recording frame rate]: Select the record frame rate for manual
record mode
[Schedule Record]: Schedule record option.
[Schedule Record Frame Rate]: Select Schedule Record frame rate
[Motion Detection]: By selecting the options, users can set relative
channels’ record mode as motion detection
[Motion Record Frame Rate]: Select record frame rate for Motion
Detection record mode