COP-USA USBDVR04SP - Manual (Page 37)

MAXDVR & DR Series Cards 37
Fig4.2 Caption and General Configuration
[Dwell Interval.]: If users enable Auto Dwell function in the main interface page,
users can set the dwell time of a page here.
[Caption]: There are four options, None, ID, Name and ID/Name for users to
select for all the channels.
‘None’ means no title;
‘ID’ means camera numbers, i.e. 1, 2, 3 and so on
‘Name’ means camera names, i.e. Cam1, Cam2 and so on
‘ID/Name’ means both camera number and camera name, i.e.
1/Cam1, 2/Cam2 and so on
[Resolution]: There are four options,320Ч240、352Ч288、352Ч240、640Ч
480 for users to select for all the channels. As the video may have interlace
lines if the users select 640x480, users may choose for
solve this problem, but it will occupy much more CPU loading.
[Call Monitor] Only DR3016F, DR3216 and DR5016F have call monitor
function at present. Users can connect another monitor to the card and select
the display modes here.
The following is about record data storage. Please check Fig4.3