COP-USA USBDVR04SP - Manual (Page 107)

MAXDVR & DR Series Cards 107
2. Launch windows
3. Windows will come up with Hardware wizard. Just click CANCEL
4. Put the installation CD in and open up MAXDVR folder run the "setup
file"
5. Follow the steps and in Windows XP, it will come up with a message
say this program has not passed windows logo testing, just "Continued
anyway"
6. Reboot computer once it is completed.
FOR COMPLETE INTRUCTIONS, REFER TO THE MANUAL.
Once Boot up, On Desktop there will be "MAXDVR" icon. Open it.
If this program recognizes the PCI card, program will opened well. Please
log in first to the program.
Once your program is opened and running, now connect the Camera.
Done.
Troubleshooting:
Q: When opening the MAXDVR program, it says "Can't find card"
A: Reboot one more time. If still same problem, click Start – Program –
MAXDVR – Install and then Uninstall. Reboot computer. After reboot,
go back to start-program-MAXDVR-install. Now click on INSTALL to
reinstall driver. Then Reboot.
If for some reason still “cant find card”, uninstall driver again. Shut down
computer. Move PCI Card to another slot. Reboot. And CANCEL when
windows detect it.
Then reinstall driver by going to start-program-MAXDVR-install.
FOR OTHER SETTINGs IN THE PROGRAM PLEASE READ THE
MANUAL.