Clarion UNGO MS8200 - Manual (Page 22)

10. Auxiliary Function 2 - Momentary / Latched / Timed Operation. (resets with arm and
disarm) Selects between Momentary, Latched, or Timed output for Aux. 2.
When Momentary operation is selected, the system will provide an output for as long as
the Transmitter button is held.
When Latched operation is selected, the system will provide an output that turns on when
the transmitter button is pressed and turns off when the transmitter button is pressed again.
When Timed operation is selected, the system will provide an output that turns on for 30
seconds each time the transmitter button is pressed. If the button is pressed again during
the 30 seconds, the output will turn off.
When the Latched or Timed outputs are activated:
• Arming the system will turn off the Aux. 2 output if it was turned on while the system was
disarmed.
• Disarming the system will turn off the Aux. 2 output if it was turned on while the system
was armed.
11. Auxiliary Function 3 - Momentary / Latched / Timed Operation. Selects between
Momentary, Latched, or Timed output for Aux. 3.
When Momentary operation is selected, the system will provide an output for as long as the
Transmitter button is held.
When Latched operation is selected, the system will provide an output that turns on when
the transmitter button is pressed and turns off when the transmitter button is pressed again.
When Timed operation is selected, the system will provide an output that turns on for 30
seconds each time the transmitter button is pressed. If the button is pressed again during
the 30 seconds, the output will turn off.
The operation of Aux. 3 is not affected by arming and disarming.
Page 20 - MS8200 / MS8300 Installation Manual
installation_rev3.qxd 7/26/99 6:07 PM Page 20