Wiring diagram, Extended range antenna (ms8300) – Clarion UNGO MS8200 User Manual

Page 9

Advertising
background image

MS8200 / MS8300 Installation Manual - Page 7

Extended Range Antenna (MS8300)

Plug the Extended Range Antenna into the
connector at the to of the Main unit and wrap
antenna wire around Extended Range
Antenna cable to prevent interference.

Pin 4 - Violet/yellow: Warn Away (-) input

Pin 1 - Red: Sensor power +12v output

Pin 3 - White/violet: Optional Sensor (-) input

Pin 1 - White/green: Door Lock (-) / Unlock +12v output

[500mA]*

Pin 2 - White

or

White/Orange: Armed (-) output

[150mA]

Pin 8 - Gray/black: Sensor Defeat (-) input

Pin 9 - Yellow/white: Auxiliary Function 1 (+/-) output

[built-in relay]

Pin 13 - Violet: Ignition Key +12v input

Pin 1 - Black: Chassis Ground

Pin 3 - White/blue: Door Unlock (-) / Lock +12v output

[500mA]*

Pin 14 - Yellow/black: Auxiliary Function 2 (-) output

[500mA]

Pin 2 - **not used**

Pin 11 - Orange: Siren +12v output

[1 Amp]

Pin 17 - Blue/red: Starter Disable Normally Open (-) output

[500mA]

Pin 18 - Red/white: Secondary Power +12v input

[20A fuse]

Pin 15 - Orange/Blue: Alarming / Horn Honk (-) output

[500mA]

Pin 2 - Yellow: Door Trigger +12v input

Pin 16 - Black/white: Dome Light (+/-) output

[built-in relay]

Pin 10 - Red: Main Power +12v input

[

3A fuse]

Pin 5 - Blue: Normally Closed Starter Disable (-) output

[500mA]

Pin 4 - Yellow/violet: Auxiliary Function 3 (-) output

[500mA]

Pin 3 - White/brown: Hood / Trunk (-) input

Pin 6 - White: Door Trigger (-) input
Pin 7 - Yellow/green: Auxiliary Function 4 (-) output

[500mA]

Logic

Sensor II

Override

Switch

Status

LED

Pin 12 - Red/Yellow: Parking Light (+/-) output

[built-in relay]

*for positive (+12v) polarity locking and unlocking max current is 150mA

Wiring Diagram

installation_rev3.qxd 7/26/99 6:07 PM Page 7

Advertising
This manual is related to the following products: