A&D Weighing SG-30KA - Manual (Page 12)

SF/SG Series Operating Instructions
12. Automatic Cancellation of a Unit Price
In very busy applications, it may be more convenient for the Unit Price entry to return to zero after each
operation.
To do this, press while the display is in normal operation.
Automatically clears the unit price.
Does not automatically clears the unit price.
While the display shows the above, press again to change the setting.
“F” functions allow the programming of various functions of the SF/SG scale. The following is a brief
description of these functions and how to program them.
Step 1: Starting with the power off, press and hold and turn on the power switch.
The scale displays:
Step 2: Press to select the desired “F” function group.
Step 3: Use the numerical keypad to select a setting for each function.
Press to cancel the selection.
Press to move to the next “F” function.
Press to store each setting selected.
11
CHANGE
1
ut c
WEIGHT UNIT PRICE PRICE
TOTAL M+
Ut nc
WEIGHT UNIT PRICE PRICE
TOTAL M+
13. Setting “F” Functions
CHANGE
1
ZERO
0
F 1 -
WEIGHT UNIT PRICE PRICE
TOTAL M+
*
F 1 - 1
UNIT PRICE
C
MEM
*
F1-1
F4-4
F2-0
F3-8
F5-1
F6-0
F7-1
Note:
To use this function, F2 must be set to 0. Refer to “13. Setting “F” Functions”.
“F” Functions continued...