A&D Weighing SG-30KA - Manual (Page 17)

SF/SG Series Operating Instructions
16
Step 2: Using the numerical keypad, enter a 3-digit label number. If an error is made, press to clear
the values. And re-enter the values.
SF series SG series
Step 3: Press the PLU key to assign to the label number, in this example, the PLU 5 key. . The PLU
number will be sent to the printer and the scale will return to the displays described in step 1. If the
label number is
“000 ”
, it will not be sent to the printer.
Step 4: Repeat steps 1 through 3 as necessary.
Step 5: After the setting has been completed, turn the power switch off.
14-5 Changing the scale PLU unit price data
Using the PLU software provided with the AD-8124, the PLU unit price data, stored in the scale, can be
changed via the AD-8124 using a personal computer.
If the data sent to the scale via the AD-8124 is not appropriate, “
E rr 10
”
appears in the UNIT PRICE
display. To release the error, press . Then, re-send the data to the scale.
For details about changing the scale PLU unit price data using the PLU software, refer to the AD-8124
label printer instruction manual.
C
se t ln 012
WEIGHT UNIT PRICE PRICE se t ln
WEIGHT
UNIT PRICE
012
PRICE
C