A&D Weighing SG-30KA - Manual (Page 15)

14
SF/SG Series Operating Instructions
14-3 Setting the printer internal clock
Set the printer internal clock as follows:
Example: Set the clock to 9:45, June 10, 2001.
Step 1: While holding down , turn the scale’s power switch on. All the displays
indicate
“- - - - - - -”
as shown below:
Assure that the printer power switch is turned on.
Step 2: Enter the date and time using the numerical keypad. Enter 4 digits for the year, 2 digits for the
month, 2 digits for the day, 2 digits for the hour in 24-hour format and 2 digits for the minute, in
that order to send the data to the printer. The printer prints the date in the order it receives the
data.
To print the date in the Year - Month - Day order, go to step 3.
To print the date in the Month - Day - Year order, go to step 5.
To print the date in the Day - Month - Year order, go to step 7.
Step 3: Using the numerical keypad, enter “2”, “0”, “0”, “1”, “0”, “6”, “1”, “0”, “0”, “9”, “4” and “5”
in this order. If an error is made, press to clear the values. And re-enter the values.
SF series SG series
Step 4: Press the PLU 1 key. The data will be sent to the printer and the scale will return to the normal
weighing mode. If the scale will not return to the normal weighing mode, check the values
entered.
Step 5: Using the numerical keypad, enter “0”, “6”, “1”, “0”, “2”, “0”, “0”, “1”, “0”, “9”, “4” and “5”
in this order. If an error is made, press to clear the values. And re-enter the values.
SF series SG series
AD-8124 continued...
T
TARE
Note:
The time will not be printed.
C
2001 0610 0945
WEIGHT UNIT PRICE PRICE 2001 WEIGHT
0610
UNIT PRICE 0945
PRICE
C
0610 2001 0945
WEIGHT UNIT PRICE PRICE 0610
WEIGHT
2001
UNIT PRICE
0945
PRICE
- - - - - - - - - - - - - - - - - -
WEIGHT UNIT PRICE PRICE