Acura 2007 TL - Owner's Manual - Manual (Page 160)

Each preset button can
store one frequency on AM and two
frequencies on FM.
Select the desired band, AM or
FM. FM1 and FM2 let you store
two frequencies with each preset
button.
Use the tune, seek, or scan
function to tune the radio to a
desired station.
If you are
traveling far from home and can no
longer receive your preset stations,
you can use the auto select feature to
find stations in the local area.
Press the A. SEL button. You will see
A. SEL flashing in the display, and
the system goes into scan mode for
several seconds. It stores the
frequencies of six AM, and twelve
FM stations in the preset buttons.
You will see a ‘‘0’’ displayed after
pressing a preset button if auto
select cannot find a strong station for
every preset button.
If you do not like the stations auto
select has stored, you can store
other frequencies on the preset
buttons as previously described.
For information on AM/FM radio
frequencies and reception, see page
.
press the
A. SEL button. This restores the
presets you originally set.
Pick a preset button, and hold it
until you hear a beep.
Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
Each preset button’s frequency is
shown on the bottom of the audio
display.
1.
2.
3.
4.
178
To turn off auto select,
Preset AUTO SELECT
Audio System (Models with Navigation System)
Fe
a
tu
re
s
157
Main Menu Table of Contents