Turn signals and headlights – Acura 2007 TL - Owner's Manual User Manual

Page 89

Advertising
background image

Push down on the

lever to signal a left turn and up to
signal a right turn. To signal a lane
change, push lightly on the lever,
and hold it. The lever will return to
center when you release it or
complete a turn.

Turn Signal
Off
Parking and instrument panel
AUTO
Headlights on
Fog lights off
Fog lights on
High beams
Flash high beams

Turning switch to the

‘‘ ’’ position turns on the parking
lights, taillights, instrument panel
lights, side-marker lights, and rear
license plate lights. Turning the
switch to the ‘‘ ’’ position turns
on the headlights. If you leave the
lights on with the key removed from
the ignition switch, you will hear a
reminder tone when you open the
driver’s door.

When the light switch is in either of
these positions, the lights on
indicator comes on as a reminder.

This indicator stays on if you leave
the lights on and turn the ignition
switch to the ACCESSORY (I) or
LOCK (0) position.

To switch from low

beams to high beams, push the left
lever forward until you hear a click.
The high beam indicator will come
on (see page

). Pull it back to

return to low beams. To flash the
high beams, pull the lever back
lightly, then release it. The high
beams will stay on as long as you
hold the lever back.

1.
2.
3.
4.
5.
6.
7.
8.
9.

62

Turn Signal

Headlights

High Beams

Turn Signals and Headlights

86

Main Menu

Table of Contents

Advertising