Lights, cleaning the seat belts – Acura 2007 TL - Owner's Manual User Manual
Page 302
Advertising
Insert the socket into the light
assembly. Turn it clockwise to
lock it in place.
Test the lights to make sure the
new bulb is working.
Reinstall the trunk lid lining. Make
sure it is installed under the edge
of the trunk seal.
Install all removed parts.
If your seat belts get dirty, use a soft
brush with a mixture of mild soap
and warm water to clean them. Do
not use bleach, dye, or cleaning
solvents. Let the belts air-dry before
you use the vehicle.
Dirt build-up in the loops of the seat
belt anchors can cause the belts to
retract slowly. Wipe the insides of
the loops with a clean cloth
dampened in mild soap and warm
water, or isopropyl alcohol.
4.
5.
6.
7.
Cleaning the Seat Belts
Lights, Cleaning the Seat Belts
Ma
int
e
na
nce
299
LOOP
Main Menu
Table of Contents
Advertising