Installing a child seat – Acura 2007 TL - Owner's Manual User Manual
Page 50
Advertising
After properly securing the child
seat (see page
), lift the head
restraint, then route the tether
strap over the seat-back and
through the legs of the head
restraint.
After properly securing the child
seat (see page
), route the
tether strap over the top of the
seat-back.
Follow steps 2 and 3 in the
previous column.
Lift the anchor cover, then attach
the tether strap hook to the
anchor, making sure the strap is
not twisted.
Tighten the strap according to the
seat maker’s instructions.
1.
2.
3.
1.
2.
45
Using the Center Anchor
Using an Outer Anchor
Installing a Child Seat
Dr
iv
er
and
P
asseng
er
Saf
e
ty
47
TETHER STRAP
HOOK
COVER
ANCHOR
Main Menu
Table of Contents
Advertising