Installing a child seat – Acura 2007 TL - Owner's Manual User Manual
Page 47
Advertising
Other LATCH-compatible seats have
a flexible-type connector as shown
above.
Whatever type you have, follow
the child seat maker’s instructions
for adjusting or tightening the fit.
Lift the head restraint (see page
), then route the tether strap
through the legs of the head
restraint and over the seat-back,
making sure the strap is not
twisted.
Push and pull the child seat
forward and from side-to-side to
verify that it is secure.
Attach the tether strap hook to the
tether anchor, then tighten the
strap as instructed by the child
seat maker.
4.
5.
6.
7.
Installing a Child Seat
44
Flexible type
TETHER STRAP
HOOK
ANCHOR
Main Menu
Table of Contents
Advertising