Acura 2007 TL - Owner's Manual - Manual (Page 46)

Your vehicle is equipped with
LATCH (lower anchors and tethers
for children) at the outer rear seats.
To install a LATCH-compatible child
seat: Place the child seat on the vehicle
seat, then attach the seat to the
lower anchors according to the
child seat maker’s instructions.
Some LATCH-compatible seats
have a rigid-type connector as
shown above.
Make sure there are no objects
near the anchors that could
prevent a secure connection
between the child seat and the
anchors.
Move the seat belt buckle or
tongue away from the lower
anchors.
The lower anchors are located
between the seat-back and seat
bottom, and are to be used only with
a child seat designed for use with
LATCH.
The location of each lower anchor is
indicated with a small button above
the anchor point.
1.
2.
3.
CONTINUED
Installing a Child Seat with
LATCH
Installing a Child Seat
Dr
iv
er
and
P
asseng
er
Saf
e
ty
43
MARKS
Ripid type LOWER ANCHORS
Main Menu Table of Contents