Audio system (models with navigation system) – Acura 2007 TL - Owner's Manual User Manual

Page 161

Advertising
background image

Bass, treble, left/right balance, and
front/rear fader are each adjustable.
In addition, you can adjust the
strength of the sound coming from
the center and the subwoofer
speakers.

To adjust them, enter the sound grid
by touching the SOUND icon on the
display or pressing the TUNE/
SOUND knob.

To adjust the treble

and bass, touch

or

icon on each

side of the treble or bass adjustment
bar, or tune the TUNE/SOUND
knob.

Adjusts the side-to-side

strength of the sound.
To adjust the left/right balance,
touch the L or R icon.

Adjusts the front-to-back

strength of the sound.
To adjust the front/rear fader, touch
the FR or RR icon.

To adjust the

strength of the sound coming from
the center or subwoofer speaker,
touch the

or

icon on each side

of the center or subwoofer
adjustment bar.

The SVC mode

controls the volume based on vehicle
speed. The faster you go, the louder
the audio volume becomes. As you
slow down, the audio volume
decreases. Touch the appropriate
icon (Low, Mid, Hi, Off) to select the
mode.

Dolby

PL (ProLogic) II signal processing
creates multi-channel surround
sound from the audio signal
recorded with two channel stereo
sources. Dolby ProLogic II can only
activate when using the CD (CD-DA,
MP3/WMA), XM radio, and AUX
audio modes. When it activates,
‘‘DPL2’’ is shown on the upper
display. To turn this feature on or off,
touch the On or Off icon.

Manufactured under license from

Dolby Laboratories. ‘‘Dolby’’,
‘‘ProLogic’’, and the double-D symbol
are trademarks of Dolby
Laboratories.

Adjusting the Sound

Treble/Bass

Balance

Fader

Center/Subwoof er

SVC (speed-sensitive volume
compensation)

Dolby PL (ProLogic) II

Audio System (Models with Navigation System)

158

Main Menu

Table of Contents

Advertising