Antari X-310 PRO - Manual (Page 12)

12
container and the fog machine liquid tank immediately after filling. Do not operate the fog
machine without liquid at any time.
 Clean with a dry cloth only. Store dry. Cleaning your fog machine regularly will help reduce
costly replacement and repair charges.
Note: All fog machines are prone to clogging due to the thick consistency of fog liquid and the
high temperature at which it vaporizes. It is strongly recommended that after 2,000 hours
of operation, do regular maintenance and services. A properly maintained fog machine
should provide years of reliable use.
 It is strongly recommended to test-run the machine on a monthly basis in order to achieve its
best fogging condition. A test-run consists of warming up the machine followed by a few
minutes of emission. Then please cool down the machine.
-Performance Notes
 It is recommended that you set Fan output to 100% and Fog Volume output between 15 to
20%. This setting will guarantee continuous output of very fine haze effect. Press button
to set your desired fog effect.
 Whenever enormous effect is required, press Manual key to emit faze at 100% output
instantly.
-Specifications
MODEL
Power
Heater
Fog Output
Output
Firs t Heat-up Time
Fluid Cons umption Rate
Tank Capac ity
Weight
Dimens ions (mm)
Pres s ure
X-310PRO
100/120 VAC, 230/240 V AC
50-60 Hz
1,000W
0.686 pa
10 min
45 min/liter, 2 hr. /Liter
(100% output, 30% output)
2.4 Liter
18 k g
L635 W275 H281
10,000 c u.ft./min
Please read and save these instructions.
MANUAL