AvMap GEOSAT 4 TRUCK - Manual (Page 10)

10
1.5 Remote control
1. Pull out the tab from the bottom end of
the remote control. The remote control is
ready to be used.
2. Point the remote control in direction of the
Geosat infrared sensor.
• MENU: opens the main available menus
• ENT: enter function to confirm a selection,
corresponds to the central part of the
joystick or to the + button in the navigator
keyboard
• ESC: exits from the current menu and
switches into cursor mode or GPS mode
• PAGE: selects the different pages available:
map, instructions and trip computer
• Upper arrow: moves the cursor up
• Lower arrow: moves the cursor down
• Right arrow: moves the cursor right
• Left arrow: moves the cursor left
• Upper-right arrow: moves the cursor
toward the upper right corner
• Upper-left arrow: moves the cursor toward
the upper left corner
• Lower-right arrow: moves the cursor
toward the lower right corner
• Lower-left arrow: moves the cursor toward
the lower left corner
• + zooms in the map
• - zooms out the map
• FIND: opens find window to search for
addresses, marks, POI
• INFO: displays the complete info on the
point on the map indicated by the pointer.
• MODE: allows entry to in advanced
functions available with further software
updates
• SPEAK: repeats the last vocal instruction.
• Alphanumeric keyboard: can be used to
edit names in the find window or to name
marks
Brightness adjustment with the remote
control
To adjust brightness with the remote
control:
1. Press the PAGE button for 3 seconds.
2. Adjust the display brightness with the right
arrow and left arrow of the JOYSTICK.
Press the ENT button to quickly change the
brightness level.
In this window it is also possible to choose
among the Auto brightness and Night Vision,