AvMap GEOSAT 4 TRUCK - Manual (Page 40)

40
the menus.
• Blue
• Grey
• White
Voice instructions
It sets the frequency and type of voice
prompts.
• Simplified: the navigator provides the
main instructions for manoeuvres.
• Detailed: provides further info on the
GPS status and on the instructions to be
followed.
Night Vision
It changes the colours palette used in the
display for enhanced night vision.
Auto brightness
It activates/deactivates the automatic
regulation of the display brightness.
11.3 Map
Map details
It sets the amount of detail displayed on the
map:
• Simple
• Normal
• USA
To use a Geosat that was purchased in
Europe in the USA, you need to add a licence
to allow the device to read US maps. For
further information on how to obtain both
the licence and the US maps, email info@
avmap.it.
Beeper
It activates/deactivates the button sounds.
Power save
It sets the level of power save after that the
power supply cable has been removed.
• OFF: no variation is applied when the
power supply cable is removed
• Medium: the brigthness is automatically
reduced after that the power cable is
removed
• Maximum: the display goes in stand by
after 30 seconds of inactivity after that the
power supply cable is removed
Factory defaults
It restores the original default settings.
Color Theme
It changes the colour used as background for
To exit from a menu press the ESC button.
If, after modification, you wish to return to
the former settings, you can restore the
default settings:
1. Press the MENU button twice, select
System setup and press the ENT button to
confirm.
2. In the General folder, select Factory
defaults.
11.2 General
Regional settings
It sets the continent in which the Geosat will
be used. The choices are:
• Europe