AvMap GEOSAT 4 TRUCK - Manual (Page 17)

1
instructions:
1. Press the MENU button. The Navigation
menu will now open.
2. Select Delete route.
3. Press the ENT button to confirm.
4.3 Reversing a route
To reverse the last route planned, follow
these instructions:
1. Press the MENU button. The Navigation
menu will now open.
2. Select Reverse route.
3. Press the ENT button to confirm.
4.4 Simulation
After having planned a route as described in
par. 3.4 it is possible to simulate the naviga-
tion.
1. Press the MENU button three times.
2. The System Setup menu will now open.
Move the JOYSTICK to the right to select
the Simulation folder and press the ENT
button to confirm.
3. Press the ENT button to start the
simulation.
4. Select Speed with the JOYSTICK and press
the ENT button to confirm.
5. Select the numbers with the right and left
arrow, and set the value with the up arrow
or down arrow.
For further details read par. 11.11.
5.1 Via points
If you want to set a sequence of destinations
or if the route viewed on the map does not
meet your needs, you can modify it, adding
up to 10 Via points. The Via point is repre-
sented on the map by a black and green flag
with a number from 1 to 10.
How to set a via point:
1. When the route has been set, press the
FIND button to open the Find menu.
2. Fill out the City and Road fields (or the
Postcode field) as described in the par.
3.2.
3. When all the fields have been filled, press
5. Advanced planning