AvMap GEOSAT 4 TRUCK - Manual (Page 28)

2
button to confirm. The Mark icon will be
changed into the HOME icon.
You can then set home as your destination
with this quick command:
1. Press the MENU button. The Navigation
menu will open.
2. From Navigation from my GPS position
select Drive me HOME and press the ENT
button to confirm.
7.6 Mark alarm
Geosat can alert you with a visible message
and a beep when you are in proximity of one
or more Marks associated with the danger
icon.
To activate this function observe the following
instructions:
1. Press the MENU button, select System
Setup and press the ENT button to
confirm.
2. Move the JOYSTICK to the right to select
the Alarm folder and press the ENT button
to confirm.
3. Select Mark alarm and press the ENT
button to confirm. In the Alarm radius
field, you can set the radius within which
to activate the alarm.
For further details read par. 11.7
Only Marks associated to the danger icon
can be alerted.
7.7 Sending and receiving Marks
There is an accessory software called
PCPlanner that makes it possible to transfer
marks and data from a PC to Geosat and vice
versa.
The transfer is made through serial
connection and not directly on the secure
digital memory.
7.8 File manager
Updating the map data may cause the loss of
your user Marks. To avoid this inconvenience
it is recommended that you save the Marks
and tracks that you have created.
How to save user files:
1. Press the MENU button twice, select File
manager and press the ENT button to
confirm.
The memory is initialised automatically and
par. 7.4.
2. Select Set as HOME and press the ENT