AvMap GEOSAT 4 TRUCK - Manual (Page 48)

4
audible signal to disconnect your AvMap
Geosat from the PC.
12.2 Updating the Map
To update the map of Geosat 4 ALL visit
www.avmap.it for the list of available maps.
To know whether your cartography needs
to be updated or not, you need to know the
version of the cartography preloaded on the
SD card and check whether that is the latest
one available on the AvMap web site.
To check your cartography version:
1. Press twice the MENU button to open the
Main Menu.
2. Select ABOUT and confirm by pressing
ENT.
3. The about page contains all the info
related to software and cartography. The
cartography version is detailed in the
bottom: Map Name and Version (V.x) e.g.
Italy V.3
The next step is to verify whether there is a
newer version available on www.avmap.it .
Check in the Cartography section or in the
Shop on line.
communicate with your unit.
GsUpdate
Once you have downloaded the drivers, you
can download the software update - called
“gsupdate”.
1. In the Support Area, Faq’s and Download
section click on Software Update. Find
the latest release of the software, which
will incorporate all the most recent
improvements (and all the previous ones).
2. Once you have downloaded the new
software on your PC, you can connect
your AvMap Geosat to the USB port,
using the cable provided. If your unit is
correctly linked, it will emit an audible
signal. It should also display the ‘Found
New Hardware’ message. Confirm the
installation
3. Open the downloaded file. This will launch
the software update utility and your AvMap
Geosat will emit two audible signals and
will display the current version of the
software and the new one. Choose one (or
more) languages from the menu and click
on ‘TRANSFER’. Once you have completed
the update click on ‘EXIT’ and wait for the
How to install the drivers on your PC:
If this is the first time that you have updated
the software, you first need to register your
product on the URL www.avmap.it under the
Support section.
Select Product registration and fill out all the
required fields. After completing the form,
you will receive an email with your login and
password details.
After registering the product, select Faqs and
Download, and choose from the drop menu
the model of the navigator to be updated,
then click on drivers (this is necessary just
the first time you update the software ). In
the drivers page click on download., you will
be asked to enter your login and password
details and then the download will start.
Once the drivers have been saved, launch the
set up (USB_Geosat_2_4_Drivers-Setup) and
follow the instructions without connecting
your AvMap Geosat to the PC. Once the
set up is finished, restart your PC. If the
drivers have been correctly installed, they
will be displayed in the Control Panel under
Add/Remove Programs as ‘Chart Plotter
USB drivers’. This driver will let your PC