Connect Tech NT960/PCI - Manual (Page 31)

Chapter 2: Hardware Installation 2-1
Intellicon-NT960/PCI User's Manual, ver. 0.02
Introduction
Hardware installation involves configuration of the following:
„ The NT960/PCI Host Adapter
„ One or more ACM/16, ACM/16RJ or ACM/Flex16 external
modules
NT960/PCI Host Adapter
Installation of the NT960/PCI Host Adapter consists of:
1. Installing the Host Adapter in your computer.
2. Connecting one or more ACM/16, ACM/16RJ or
ACM/Flex16 external modules.
You must configure the various settings before installing the Host
Adapter in the computer. In order to insure a successful
installation, please follow the steps in the order specified above.
The NT960/PCI Host Adapter is very sensitive to static electricity.
Make sure that before you remove the card from the anti-static
shipping bag, you wear an anti-static wristband. When you
remove the board from the anti-static bag, handle it only by the
edges and place it on the anti-static bag or an anti-static mat.