Connect Tech NT960/PCI - Manual (Page 83)

Chapter 4: Appendix G - Factory Settings 4-31
Intellicon-NT960/PCI User's Manual, ver. 0.02
ACM/16, ACM/Flex16, ACM/16RJ Modules
The NT960/PCI ACM/16, ACM/16RJ and ACM/Flex16 modules
ship with factory settings for the following:
„ ACM/16 ACM/16RJ, or ACM/Flex16 address
„ ACM/Flex16: RS-485 SLIM options
ACM/16, ACM/Flex16, ACM/16RJ Address Setting
The ACM/16, ACM/Flex16 or ACM/16RJ address switch block
or switch assigns a number for each port on that particular
ACM/16, ACM/Flex16 or ACM/16RJ. Connect Tech ships the
ACM/16, ACM/Flex16 and ACM/16RJ with the address switch
block or switch set for address 1. This setting assigns port
numbers 1 through 16 to the serial ports on the ACM/16,
ACM/Flex16 or ACM/16RJ module. Figure 26 shows the
location and factory setting of the ACM/16 and ACM/Flex16
address switch block. Figure 27 shows the location and factory
setting of the ACM/16RJ address switch.