Appendix f: slim insertion/removal, Appendix f: slim insertion/removal -26 – Connect Tech NT960/PCI User Manual
Page 78
Advertising
4-26
Chapter 4: Appendix F - SLIM Insertion/Removal
Intellicon-NT960/PCI User's Manual, ver. 0.02
Appendix F: SLIM Insertion/Removal
This section outlines procedures for the following:
ACM/Flex16 back cover removal.
SLIM insertion.
SLIM removal.
Your ACM/Flex16 and Serial Line Interface Module (SLIM) are
very sensitive to static electricity. Make sure that before you
remove them from the anti-static shipping bag, you wear an anti-
static wristband. When you remove them from the anti-static bag,
handle them only by the edges and place them on the anti-static
bag or an anti-static mat.
Advertising