Bike2Power LightCharge - Manual (Page 14)

ENGLISH
14 | P a g e
Copyright © 2012 Bike2Power. All rights reserved
Step 3. If charging does not begin immediately after you start pedaling, do one of
the following
a. Increase speed
b. Stop the bicycle and adjust the dynamo’s position to the correct
position (if using a bottle dynamo); or, check the connection hub
connection
c. Stop the bicycle and check all connections including your USB cable
d. Stop the bicycle and detach USB charging cable from your mobile
device for a few seconds
Note: While charging your mobile device, the dynamo output may not be
enough to charge your mobile device if you use a Bluetooth® headset
with it.
Switching between charging lights and charging mobile devices
LightCharge® does not charge the mobile device and bicycle lights simultaneously.
You may choose which device to charge by using the charging mode switch.
a. Use charging mode switch (A3) to alternate between charging lights
and mobile devices plugged in to USB port.
Taking Care of Your Device
(!) Handle your LightCharge® devices and accessories with care.
Keep the devices dry. Any type of moisture can corrode the electronic circuits. That includes
humidity, precipitation, and all types of liquids. If the devices become wet, allow them to
dry out completely.
Avoid using or storing the devices in the dirty and dusty areas. Moving parts and electronic
components of the device can become damaged.
Do not attempt to open the devices. Do not bend, drop, or crush the devices. Avoid dropping,
knocking, or shaking the devices. Rough handling may result in damage to the mechanical
parts of the device.
Use only soft, clean, and dry cloth to clean the surfaces of the devices.
Do not paint the devices. Painting your device may result in clogging the mobbing parts and
ports, and prevent the device from proper operation
Recycle your used electronic products, batteries, and packaging materials to the dedicated
recycling outlets.
Limited Warranty
Bike2Power warrants its products to be free from the manufacturer’s defects for 90 (ninety)
days from the date of the original purchase. This warranty extends only to the original
retail purchaser and covers defects and malfunction occurring in a course of the product’s