Door locks, Liftgate, Door locks -5 liftgate -5 – Buick 2011 Enclave User Manual

Page 11

Advertising
background image

Black plate (5,1)

Buick Enclave Owner Manual - 2011

In Brief

1-5

3. Immediately after completing

Step 2, press and hold

/

until

the parking lamps flash.

When the vehicle starts, the parking
lamps will turn on and remain on as
long as the engine is running. The
doors will be locked and the climate
control system may come on.

The engine will continue to run for
10 minutes. Repeat the steps for a
10-minute time extension. Remote
start can be extended only once.

Canceling a Remote Start

To cancel a remote start:

.

Aim the RKE transmitter at the
vehicle and press and hold

/

until the parking lamps turn off.

.

Turn on the hazard warning
flashers.

.

Turn the ignition switch on and
then off.

See Remote Vehicle Start on
page 2‑5
.

Door Locks

To lock or unlock a door manually:

.

From the inside use the door
lock knob on the window sill.

.

From the outside turn the key
toward the front or rear of the
vehicle, or press the

Q

or

K

button on the Remote Keyless
Entry (RKE) transmitter.

Power Door Locks

On vehicles with power door locks,
the controls are located on the front
doors.

K

: Press to unlock the doors.

Q

: Press to lock the doors.

See Power Door Locks on page 2‑8.

Liftgate

To open the liftgate the vehicle must
be in P (Park). Press the touchpad
under the liftgate handle. To close
the liftgate, use the pull cup or pull
strap as an aid.

Power Liftgate

On vehicles with a power liftgate,
the vehicle must be in P (Park) to
operate it.

.

Press and hold the liftgate
button

&

on the Remote

Keyless Entry (RKE) transmitter.

.

Press the liftgate button on the
center console.

.

Press the touchpad switch on
the outside liftgate handle.

For more information see Liftgate on
page 2‑9
.

Advertising