Brake system warning light, Brake system warning, Light -21 – Buick 2011 Enclave User Manual

Page 139: Instruments and controls 5-21

Advertising
background image

Black plate (21,1)

Buick Enclave Owner Manual - 2011

Instruments and Controls

5-21

The DLC is under the instrument
panel to the left of the steering
wheel. See your dealer if assistance
is needed.

The vehicle may not pass
inspection if:

.

The malfunction indicator lamp is
on with the engine running, or if
the light does not come on when
the ignition is turned to ON/RUN
while the engine is off.

.

The critical emission control
systems have not been
completely diagnosed by the
system. This can happen if
the battery has recently been
replaced or if the battery has run
down. The diagnostic system
evaluates critical emission
control systems during normal
driving. This can take several
days of routine driving. If this
has been done and the vehicle
still does not pass the
inspection, your dealer can
prepare the vehicle for
inspection.

Brake System Warning
Light

The vehicle brake system consists
of two hydraulic circuits. If one
circuit is not working, the remaining
circuit can still work to stop the
vehicle. For normal braking
performance, both circuits need to
be working.

If the warning light comes on, there
is a brake problem. Have the brake
system inspected right away.

Metric

English

This light should come on briefly
when the ignition key is turned to
ON/RUN. If it does not come on
then, have it fixed so it will be ready
to warn if there is a problem.

This light may also come on due to
low brake fluid. See Brakes on
page 10‑22
for more information.

When the ignition is on, the brake
system warning light will also come
on when the parking brake is set.

Advertising