All-wheel drive, Starter switch check, Lock control function check -25 – Buick 2011 Enclave User Manual

Page 317

Advertising
background image

Black plate (25,1)

Buick Enclave Owner Manual - 2011

Vehicle Care

10-25

All-Wheel Drive

It is not necessary to check the
all–wheel drive lubricant levels.
A fluid leak is the only reason for
fluid loss. If a leak occurs, take the
vehicle to the dealer as soon as
possible.

Starter Switch Check

{

WARNING

When you are doing this
inspection, the vehicle could
move suddenly. If the vehicle
moves, you or others could be
injured.

1. Before starting this check, be

sure there is enough room
around the vehicle.

2. Firmly apply both the parking

brake and the regular brake.
See Parking Brake on
page 9‑28
.

Do not use the accelerator
pedal, and be ready to turn off
the engine immediately if it
starts.

3. Try to start the engine in each

gear. The vehicle should start
only in P (Park) or N (Neutral).
If the vehicle starts in any other
position, contact your dealer for
service.

Automatic Transmission
Shift Lock Control
Function Check

{

WARNING

When you are doing this
inspection, the vehicle could
move suddenly. If the vehicle
moves, you or others could be
injured.

1. Before starting this check, be

sure there is enough room
around the vehicle. It should be
parked on a level surface.

2. Firmly apply the parking brake.

See Parking Brake on
page 9‑28
.

Be ready to apply the regular
brake immediately if the vehicle
begins to move.

3. With the engine off, turn the

ignition on, but do not start the
engine. Without applying the
regular brake, try to move the
shift lever out of P (Park) with
normal effort. If the shift lever
moves out of P (Park), contact
your dealer for service.

Advertising