Buick 2011 Enclave - Manual (Page 275)

Black plate (37,1) Buick Enclave Owner Manual - 2011
Driving and Operating 9-37
R (Reverse), the video image
automatically appears on the
navigation screen. Once the driver
shifts out of R (Reverse), the
navigation screen will go back to the
last screen that had been displayed,
after a delay.
Turning the Rear Vision Camera
System On or Off
To turn the rear vision camera
system on or off:
1. Shift into P (Park).
2. Press the MENU button to enter
the configure menu options, then
press the MENU hard key to
select Display or touch the
Display screen button.
3. Select the Rear Camera Options
screen button. The Rear Camera
Options screen displays.
4. Select the Video screen button.
When the Video screen button is
highlighted the RVC system
is on.
The delay that is received after
shifting out of R (Reverse) is
approximately 10 seconds. The
delay can be cancelled by
performing one of the following:
. Pressing a hard key on the
navigation system.
. Shifting in to P (Park).
. Reach a vehicle speed of
8 km/h (5 mph).
There is a message on the rear
vision camera screen that states
“Check Surroundings for Safety”.
Adjusting the Brightness and
Contrast of the Screen
To adjust the brightness and
contrast of the screen, press the
MENU button while the rear vision
camera image is on the display. Any
adjustments made will only affect
the rear vision camera screen.
]
(Brightness) : Touch the +
(plus) or – (minus) screen buttons to
increase or decrease the brightness
of the screen.
_
(Contrast) : Touch the + (plus)
or – (minus) screen buttons to
increase or decrease the contrast of
the screen.